Skip to content

Gold Coast · Brisbane · Northern Rivers and beyond

Pricing

Construction 3D scanning pricing.

You pay for the stages you book and the deliverables you need, nothing more. Get an instant estimate below, or a tailored quote back within 24 hours.

Quick answer Kybos quotes capture by floor area, from $395 for smaller projects, and the rate per square metre drops as the area grows. Booking 2, 3 or 4 or more stages together takes 5%, 10% or 15% off. Standard delivery is 24–36 hours, and a tailored quote comes back within 24 hours.

Last updated

  • From $395Per capture
  • 24 hrQuote back
  • 5–15%Off when you book the build
  • No lock-inPay per stage
02Instant estimate

What will it cost, and what will it save?

Enter the project to see what a 3D record could save you, then add your email to see your price. For larger or multi-storey jobs, reach out directly.

Project parameters

I’m a
Construction stages to capture

What a 3D record could save

$0 – $0

On this project, based on what rework costs Australian builds when every key stage is captured. How it’s calculated

  • Defect and variation disputes settled from a dated record$0
  • Rework avoided before services are covered$0
  • Site visits and calls replaced by the 3D record$0

Your price

03How it’s calculated

Where the savings come from.

We start from Australian data. Studies of Australian projects by Peter Love put rework at 2.4–6.4% of contract value. We assume a 3D record of the key stages avoids or settles about a third of it: 0.8–2.1% of the project value, counted in full when four or more stages are captured and proportionally less for fewer.

01

Disputes and defects

A dated, measurable record of each stage settles variations, delay claims and defect arguments in minutes instead of weeks. In the NSW Building Commission’s 2021 strata survey, 39% of buildings had a serious defect.

02

Rework before it’s covered

Pre-slab and pre-plaster captures record services, set-outs and framing before they disappear. When a question comes up later, it is measured on screen instead of cutting into a finished wall.

03

Fewer site visits

Clients, certifiers and consultants check the build from their desk. We value a site visit at 2.5 hours of a project manager’s time at $120 an hour, so $300 a visit. That is the figure behind “pays for itself”.

04What sets the pricing

Priced by the size of the job.

Capture is quoted on floor area, starting at $395. The bigger the project, the lower the rate per square metre. Everything else adjusts the quote from there.

01

Floor area

The main driver. Capture is quoted per square metre, and the rate drops as the area grows, so a bigger job costs less per m².

02

Stages

Every stage is the same rate. Book the build as a package and the rate comes down across the stages.

03

Deliverables

A walkthrough is standard. Point cloud, Scan-to-BIM and drone add to the scope when you need them.

04

Location

Standard across the Gold Coast, Brisbane and the Northern Rivers. Travel applies further out and is quoted up front.

05Book the build

Capture more, pay less per stage.

  • 5% off

    Book 2 stages together.

  • 10% off

    Book 3 stages together.

  • 15% off

    Book 4 stages or more, or a full Construction Dossier.

06In every quote

What’s always included.

01

Every capture

  • A measurable 3D walkthrough, on any device
  • Standard delivery in 24–36 hours, priority in as little as 12. Larger projects are scheduled in your quote
  • One shareable link for your client, certifier or insurer. No app, no login
02

On site

  • Insurance, White Card and SWMS on request
  • Captured around the trades, no shutdown
  • Travel quoted up front outside SEQ and the Northern Rivers
07What clients say

Rated 5.0 by the people who used it.

★★★★★ Real reviews from the Kybos Google Business Profile, quoted word for word. Read them all on Google

★★★★★

The service that Louis provided on our last job at Belongil was amazing.

Prior to the lining being installed to all the internal walls & ceilings Louis completed a scan of all the services located in the ceilings & walls.

This proved an amazing tool to locate services, once all walls & ceilings were lined.

Even after this project had been completed, we still use this scan, for locating services.

We will be using this scan for our present & future projects.

Greg L.Builder · 3D scan behind the walls, Belongil
★★★★★

Louis from Kybos scanned our renovation in 3D before we sheeted the walls, and it’s turned out to be one of the smartest things we did. I’ve gone back to that scan on site more times than I can count, checking stud locations and where all the services run. We’ve had a few design changes since then, and without being able to see behind the walls we would have been completely stuck. I can only imagine how useful this would be on a big commercial job where there’s even more going on behind the scenes. Highly recommend.

Nick F.Renovation scanned before the walls were sheeted
08Questions

Plain answers.

01How much does construction 3D capture cost?

Pricing depends on site size, project stage, capture method and required deliverables. Smaller projects start from around $395, while larger or multi-stage projects are quoted individually. A tailored quote is usually provided within 24 hours.

02How is Scan-to-BIM priced?

Separately from capture. It converts your point cloud into a modelled Revit or IFC deliverable, so it’s quoted per project on floor area and the Level of Development required (LOD 200–400). Send your plans for a quote.

03How accurate is the instant estimate?

It uses the same rates as our quotes, by floor area, asset type and number of stages, plus hosting for the project duration. Enter your email to see it. Site access, travel and extra deliverables are confirmed in the tailored quote.

04How do you work out what 3D capture saves?

We take Australian rework research, 2.4–6.4% of contract value, and assume a 3D record of the key stages avoids or settles about a third of it: 0.8–2.1% of the project value. Four or more stages count in full, fewer count proportionally less. The total is split across disputes and defects, problems caught before they are covered, and site visits replaced. Builders see more of it in disputes and rework, developers in site visits. It is an illustration, not a guarantee.

05Where do the figures come from?

Peter Love’s studies of Australian projects (2003 and 2005) measured rework at 2.4–6.4% of contract value. The NSW Building Commission’s 2021 strata survey found a serious defect in 39% of buildings. As a cross-check, published research on weekly reality capture in the United States, such as DroneDeploy’s, puts the return at about 1% of project value, inside our range. Time is counted at $120 an hour.

06How do I get a quote?

Send your site details, plans or project requirements through the contact form, by email at info@kybos.au or by calling 0451 052 500. Tailored quotes are typically provided within 24 hours.

09Coverage
Serving the construction industry across Australia, the South Pacific and beyond. Select a location to start an enquiry.

Ready to document your next project?

Quote back to you within 24 hours.

Get a quote