BUILDERS & TRADES
Catch it before it costs you.
Stage-by-stage 3D records that protect your reputation, reduce rework, and give you proof when it matters.
The Problem
Neighbour damage claims you can't disprove
A neighbour blames structural cracking on your excavation. Without a high-resolution baseline, you're stuck fighting a costly claim you can't disprove.
The "he said, she said" dispute.
A subbie claims a condition wasn't as promised, or a client argues a variation. Everyone's got their own photos, there's no independent record, and the delay's burning your margin.
Services buried behind the lining.
Someone needs a pipe or cable months after the walls closed up. That means cutting into finished work to guess where it runs, because nothing recorded what went in before the plaster.
Defects after you've signed off.
The inspector raises items you thought were closed. No dated record from practical completion, so you're back on the tools through the DLP, on your own dime.
Clients chasing progress you can't easily show
They can't get there but want progress, so you're forwarding your super's camera roll and hoping the angles flatter.
Wasted travel for remote updates.
PMs, engineers and QSs lose hours in traffic just to verify one detail, tick off a milestone, or confirm a measurement.
The 3D capture solution
Scan before you close up.
An indisputable baseline
A dated, high-resolution 3D record of adjacent properties before you break ground. When a claim lands, you disprove it with measurable evidence instead of lawyers.
One independent record.
A timestamped 3D capture of exactly what was built and when. Settle disputes and variations on the facts, fast, before they eat your programme.
Capture every wall and ceiling before lining, and the location of every service stays on record. Find anything later without opening finished work.
Proof at practical completion.
A dated, objective record of condition at handover, so defect claims get resolved on the evidence, not out of your pocket months later.
Progress the client can see.
Send one link and they walk the latest capture themselves, professional, timestamped, and better than any camera roll.
Walk the site from your desk.
Your PM, engineer and QS check progress, details and measurements from one link. No app, no login, no drive to site.
You get a single, accurate source of truth for every project, accessible to every stakeholder, without anyone needing to drive to site.
Click anywhere to move. This is a real pre-plaster capture. Every pipe and cable in this frame is now behind plaster, and the owner can still see all of it.
DEVELOPERS & PMS
Fewer surprises.
Faster decisions.
Timestamped 3D records across every site and stage, so you can run the project from the evidence instead of the phone calls.
The Problem
Reporting that doesn't line up.
Four sites, three supervisors, and every update arrives as a different mix of photo folders, texts and phone calls. Nothing standardised, nothing dated, no complete picture.
Disputes that land on your desk.
Your builder and a subcontractor are blaming each other over rough-in work. Both have their own photos. You have no independent record and the delay is burning program.
Clients and investors who can't get to site.
They want progress. You're forwarding your supervisor's camera roll and hoping the angles flatter.
Defects reopening after sign-off.
The buyer's inspector raises items you thought were closed. No dated record of the condition at practical completion, so you're back on the hook.
Consultant hours lost in traffic.
Your PM, engineer and QS drive across town to verify one detail or tick off one milestone.
Aerial deliverables nobody in-house can produce.
A DA condition needs photomontage positions from exact coordinates, or the marketing team wants progress aerials. Your builder can't do it and a separate consultant for half a day feels like overkill.
The 3D capture solution
Progress they can walk through.
Verification from the desk.
Measure, check and confirm from the capture. Site visits become a decision, not a default.
Licensed aerial capture on the same visit.
CASA-licensed drone work for photomontage camera positions, progress aerials and marketing imagery, booked alongside your ground capture.
One format across the portfolio.
Every site captured the same way at the same milestones. Consistent, dated, and comparable across your whole program.
One independent record.
A dated 3D capture of exactly what was built and when, taken by someone with no stake in the outcome. Settle it on the facts, not the loudest voice.
One link, no app, no login. They see the site themselves, professionally documented and timestamped.
Proof at practical completion.
An objective record of condition at handover, so defect claims get resolved on the evidence rather than out of your contingency.
You get one accurate source of truth across every project, accessible to every stakeholder, without anyone needing to drive to site.
Click anywhere to move. This is a real pre-plaster capture. Every pipe and cable in this frame is now behind plaster, and the owner can still see all of it.
ARCHITECTS & DESIGNERS
Design from reality.
Not assumptions.
Registered point clouds and as-built models you can trust, so your documentation starts from what's actually there.
The Problem
Drawings that don't match the building.
The only existing documentation is a set from 1987 and nothing on site agrees with it.
A survey done with a tape measure.
The floor turns out to be 40mm out over 12 metres. Nobody caught it, and now your joinery package needs re-detailing.
Four consultants, four base models.
Structure, hydraulics, mechanical and electrical each start from their own version of the truth. Clashes appear on site.
Your office is in one city. The project's in another.
Every site question costs a flight and a day, or gets answered by someone else's photo.
No way to prove where it went wrong.
Window heads are wrong. The builder framed off the structural set, not yours. Without an independent capture, the origin of the error is unprovable.
As-built models you don't have the hours to build.
The project needs a Revit or IFC model of existing fabric and your team is already stretched.
One dataset everyone shares.
As-built Revit models at LOD 200 to 400 through our modelling partner, with IFC exports for open-format workflows.
The 3D capture solution
A complete existing conditions capture.
The building as it stands today, measurable and accurate. Dimensions, levels, structure and services, all in one dataset.
Registered point clouds.
E57 or RCP data that drops straight into Revit, ArchiCAD or AutoCAD. Real geometry, not a grad's sketch.
Every consultant coordinates from the same registered capture, so clashes surface in the model where they're cheap to fix.
A walkthrough on your screen.
Open the capture, take the measurement, answer the question. Site visits become deliberate rather than reactive.
Construction verified against design.
Pre-plaster captures record framing, services and openings before they're covered, so as-built and design can be compared directly.
Scan-to-BIM, delivered.
You get a single, accurate source of truth for every project, accessible to every stakeholder, without anyone needing to drive to site.
Click anywhere to move. This is a real pre-plaster capture. Every pipe and cable in this frame is now behind plaster, and the owner can still see all of it.
HOMEOWNERS & BUYERS
Know exactly what was built. And how.
An independent record of your home at the stages that matter, for the biggest investment you'll ever make.
The Problem
Trusting instead of verifying.
our builder says the plumbing and waterproofing are exactly where they should be. You have no way to check before the plaster goes on.
A defect appears six months in.
A subbie claims a condition wasn't as promised, or a client argues a variation. Everyone's got their own photos, there's no independent record, and the delay's burning your margin.
Construction starts next door.
A year on, your boundary wall is cracked and the developer says it was pre-existing.
A 45-minute inspection on a 12-month build.
Your building inspector can only see what's visible on the day. That's your entire independent check.
Nobody knows where the services run.
You want to renovate five years on. The plans don't match what was built, so you're paying a plumber to cut holes and go looking.
Wasted travel for remote updates.
Buying off the plan or newly built, your documentation is whatever they chose to show you.
A dilapidation record before they start.
Captured independently, held by you, and not curated by the person you might one day be in dispute with.
The 3D capture solution
A pre-plaster record.
Every wall and ceiling captured after services are installed and before lining, so you can see what went in rather than take someone's word for it.
Proof at handover.
A dated, objective 3D record of the home at practical completion. If something surfaces in the warranty period, the evidence already exists.
A dated, measurable capture of your property before work begins. It stops the argument before it starts.
A record that lasts as long as the house.
Every pipe, cable and beam is on file from before the walls closed. No exploratory demolition.
A record your inspector can work from.
A complete capture of the stages they never saw, so their report is informed by more than one walkthrough.
Walk the site from your desk.
You get a single, accurate source of truth for every project, accessible to every stakeholder, without anyone needing to drive to site.
Click anywhere to move. This is a real pre-plaster capture. Every pipe and cable in this frame is now behind plaster, and the owner can still see all of it.
Operating Across Australia and the South Pacific
Frequently asked questions
