# Point Cloud Survey & LiDAR 3D Scanning > Registered 3D point cloud data for design, documentation and coordination, delivered in E57 and RCP for AEC teams across SEQ and Northern NSW. Source: https://www.kybos.au/point-cloud-survey/ Last updated: 2026-10-25 Publisher: Kybos (kybos.au), Gold Coast, Brisbane and Northern Rivers, Australia --- Gold Coast · Brisbane · Northern Rivers and beyond Point cloud survey # Point cloud survey. The data behind the design. LiDAR 3D scanning that captures a site as measured spatial data, ready to model, draw over, or hand to your consultants. Delivered in the formats your workflow already uses. **Quick answer** A point cloud survey captures a site as measured 3D data, delivered in formats such as E57, RCP, LAS and XYZ. Documentation capture is typically 10–20 mm accurate, and 5–10 mm where the project needs it. Kybos is not a registered surveyor. [Get a quote](https://www.kybos.au/contact-us/)See deliverables - **E57 · RCP** LAS · XYZ - **10–20 mm** Documentation - **5–10 mm** Where required - **24 hr** Quote back ## What teams do with a point cloud. ### Design from what’s there Architects and engineers draw over the measured building instead of old plans and tape measures. ### Check new against existing Coordinate new work against the structure and services already in place before anything is ordered or cut. ### Compare built with designed Lay the as-built capture against the design to see where the finished work differs, and by how much. ### Measure later, without a visit Pull a dimension, a level or a clearance from the data months on, with nobody returning to site. ## Raw data, or design-ready. Your call. E57, RCP, LAS, XYZ ### Point cloud The raw spatial data: millions of measured points capturing exact site geometry. Revit RVT, IFC ### Scan-to-BIM The point cloud modelled into an intelligent Revit model, LOD 200–400, produced through scan-to-BIM. [Scan-to-BIM](https://www.kybos.au/scan-to-bim/) DWG, DXF ### Scan-to-CAD 2D floor plans, elevations, sections and reflected ceiling plans, drawn from the scan. ## Matched to your tolerance. For documentation and coordination, capture is typically 10–20 mm. Where a project needs it tighter, structural engineering, heritage, complex civil, terrestrial laser scanning reaches 5–10 mm depending on conditions. The method is matched to your tolerance at quote stage. Kybos captures measured 3D data. It isn’t a registered surveyor, so where certified survey data is required, it works alongside one. ## Need it modelled, not just measured? A point cloud is the measured record. Turning it into an intelligent Revit or IFC model is the scan-to-BIM step, built straight off the same scan. [Scan-to-BIM](https://www.kybos.au/scan-to-bim/) ## Plain answers. 01What’s the difference between Scan-to-BIM and a point cloud? A point cloud is a measured 3D dataset made up of millions of spatial points captured from a building or site and delivered in formats such as E57 or RCP/RCS. Scan-to-BIM uses that point cloud as a reference to create a structured Revit model, with architectural, structural and MEP elements modelled as required by the project scope. 02Can I get CAD drawings or Revit models from a 3D laser scan? Yes. Registered point cloud data can be used to produce floor plans, elevations, sections, reflected ceiling plans, DWG or DXF drawings, and Revit Scan-to-BIM models. Model detail can be specified from LOD 200 to LOD 400, with IFC export available where required. 03What file formats does Kybos deliver? Point clouds in E57, RCP/RCS, LAS and XYZ; Revit models in RVT with IFC export; and CAD drawings in DWG or DXF. Deliverables are scoped to suit the software and workflow of the project team. 04How accurate is Kybos 3D laser scanning? General reality-capture documentation may typically be within approximately 10–20 mm, while higher-precision terrestrial laser scanning workflows can target approximately 5–10 mm where required. The method and tolerance are confirmed during project scoping. 05Do I need specialist software to view a point cloud? Raw point clouds are typically opened in Autodesk ReCap, CloudCompare, Revit, Navisworks or other compatible applications. Kybos can also provide browser-based viewing so stakeholders can navigate the data without specialist software. 06What is an existing conditions or measured building survey? It records the current geometry and condition of a building or site before renovation, demolition or construction. Where certified survey information is required, Kybos works alongside a registered surveyor. [Gold Coast & Northern Rivers Home base · NSW–QLD border →](https://www.kybos.au/contact-us/?region=gold-coast-northern-rivers) [Brisbane & Sunshine Coast Regular coverage →](https://www.kybos.au/contact-us/?region=brisbane-sunshine-coast) [Sydney By arrangement →](https://www.kybos.au/contact-us/?region=sydney) [New Caledonia South Pacific · larger projects →](https://www.kybos.au/contact-us/?region=new-caledonia) [Melbourne By arrangement →](https://www.kybos.au/contact-us/?region=melbourne) [Adelaide Larger projects →](https://www.kybos.au/contact-us/?region=adelaide) [Perth Larger projects →](https://www.kybos.au/contact-us/?region=perth) Operating across Australia and the South Pacific. Select a location to start an enquiry. ## Got a site to capture? Get it as data. Send the site details and the formats you need. Quote back within 24 hours. [Get a quote](https://www.kybos.au/contact-us/) - Phone[0451 052 500](tel:+61451052500) - Email[info@kybos.au](mailto:info@kybos.au) - BasedNSW–Queensland border